


Polished plaster gloss levels run from a soft matt through satin to a high gloss, and the level is set by how the final coats are trowelled and burnished, not by a different product. Zavoré lays every level in homes across London, Birmingham, Manchester and the UK. Matt suits period rooms and uneven walls, satin is the easy middle ground, and high gloss needs a very flat wall.
To understand the finish as a whole, start with our page on polished plaster. We lay every sheen with our own artisans, from city flats to country houses, and you can find the cities we cover under Venetian plastering across the UK.
Venetian plaster is a lime based material laid in very thin coats. On the last coats the artisan presses the surface with a clean steel trowel, closing it up and burnishing it. The more the surface is compressed, the more it reflects. A few light passes give a gentle satin, while repeated, firmer passes give a deep shine that can look almost wet. Polished plaster is simply the name for the glossier end of this range.
The aggregate in the plaster also matters. A coarser material such as marmorino keeps a fine grain and rarely goes beyond a quiet lustre. A finer Venetian plaster can be pushed much further. Colour changes the way gloss reads too, because deep shades show reflections more strongly than pale ones.
A matt or very low sheen finish is the softest option. It looks chalky and natural, it hides small undulations and it suits older homes with solid walls, such as Victorian terraces, Edwardian semis and stone cottages. Limewash and marmorino are the obvious choices if you want true matt. In a bedroom or a snug, a low sheen keeps the room restful.
Satin is the level most people end up choosing. It has a gentle glow and enough reflection to show the movement in the plaster, yet it does not mirror every lamp. It works in living rooms, hallways and dining rooms, and it is easier to live with in rooms that get a lot of side light from tall windows. Satin is also a good choice when the wall is flat but not perfect.
High gloss is the dramatic end. It has real depth and gives a marble look, although it is not marble. It suits a dining room, a hallway in a mansion block, a powder room or a reception wall in an office. The catch is flatness. Polished finishes show every dip, and at high gloss even a slight ripple stands out when light crosses it from a low angle. Walls must be skimmed true first, and plasterboard joints need reinforcing and the right primer.
A high sheen also shows marks more readily in a busy household, so think about children, pets and furniture before you commit.
A matt wall can usually be taken to a higher sheen with further coats and burnishing, and a protective wax can lift it a little more. Going the other way is harder, because a highly burnished surface is closed and dense. If you are unsure, start lower. We make a sample at the agreed sheen before any wall work, so you see the level before it goes on.
Whether you are in London, Birmingham, Manchester or anywhere else in the UK, the process is the same. You send photos, drawings and rough measurements. We survey to check flatness, the substrate and the light in the room. You approve a sample in your colour and gloss level, then we agree the price and dates. Work is planned in blocks of days so the same artisans stay on the job. Our Venetian plaster installation page lists every finish we lay.
Not harder to clean, but it shows marks, scuffs and fingerprints more clearly than a matt finish. A gentle wipe with a soft damp cloth is usually enough. In a busy family hallway, satin can be the more relaxed choice, and we will talk it through with you at the survey.
It can, because a higher sheen needs flatter walls and more burnishing time. The bigger factors are usually the condition of the wall, the area and access. We only give a price after the survey, once we know how much preparation the wall needs.
Matt hides the most. Marmorino and limewash are very forgiving on older walls, and a low satin Venetian plaster also hides small undulations. High gloss hides almost nothing, so a wall that is not flat will need skimming before it can take that level of shine.
Yes. A sample board shows the colour and sheen in your room. You can also book a visit to our London showroom and training centre by appointment, or learn the technique on a course in Birmingham, London or Manchester.
To talk about the right gloss level for your walls, call +44 7592 929191, Monday to Saturday, 9am to 6pm, or send photos and rough measurements to sales@zavore.co.uk. We will suggest a sheen that suits the room and arrange a sample.
Leeds has many Victorian terraces and villas with solid walls and original mouldings. This guide covers lime plaster repairs and coving r...
LimewashHow brush technique, thin coats and drying create the cloudy look of limewash, and how to ask Zavoré about limewash training.
Buying GuideThe Zavoré plaster range grouped by the look and job each one does, to help you shortlist finishes before ordering samples.
BirminghamA practical checklist for students before a Zavoré Academy course. Clothes, reading, questions to bring and what is already supplied at t...
ManchesterA guide to Venetian plastering in Manchester offices, receptions and commercial spaces, from finish choice and brand colours to planning ...
LimewashAn outline of what limewash training covers about mixing limewash and the risks of slaking lime, and how to ask Zavoré about it.
Providing luxury finishes for the most prestigious addresses in the world
Venetian plaster, limewash, microcement, tadelakt, metallics, sculptural plaster and gold leaf, supplied and installed by our own team, with Venetian plaster taught at our Birmingham studio.
One list, run by the people who make the material. No noise, and nothing we would not want to read ourselves.
We email as the house has something worth saying, never daily. Unsubscribe from any email, or reply STOP to any text. We never pass your details to anyone.